The kilo of filament, compared every morning across 31 shops that ship to Spain.

• PLA
  €5.38/kg typical €20.99 cheapest at Filament2Print, PLA HR-870 Sakata 6495 in stock
• PETG
  €6.50/kg typical €19.99 cheapest at Filamentor, Filamento PETG blanco house brand 1817 in stock
• TPU
  €8.79/kg typical €40.65 cheapest at Filament2Print, Smartfil TPU 93A 887 in stock
• PLA+
  €9.95/kg typical €19.19 cheapest at Filamentor, Filamento PLA+ negro house brand 843 in stock
• ABS
  €8.00/kg typical €22.69 cheapest at XYZfilaments, OUTLET ABS-E RE 1kg 1.75mm Sakata 3D 814 in stock
• ASA
  €2.50/kg typical €33.20 cheapest at Filament2Print, Prusament ASA 481 in stock
• PC
  €10.40/kg typical €53.08 cheapest at Filament2Print, PolyMax Tough PC 142 in stock
• PLA-CF
  €13.95/kg typical €28.49 cheapest at Filamentor, Filamento PLA-CF rojo house brand 128 in stock
• PA
  €24.49/kg typical €76.98 cheapest at 3DJake España, SUNLU Easy PA Natural, 1,75 mm / 1000 g 124 in stock
• PCTG
  €20.64/kg typical €30.49 cheapest at 3DJake España, AzureFilm PCTG Transparent, 1,75 mm / 1000 g 99 in stock
• PETG-CF
  €18.95/kg typical €29.49 cheapest at Filamentor, Filamento PETG-CF gris house brand 99 in stock

€0/kg€88.53/kg

• Standard 10359 in stock, from €2.50/kg

  Normal gloss. The cheapest and the one with the most colours.

• Matte 1020 in stock, from €9.95/kg

  No shine, hides the layer lines. Slightly more brittle and abrasive.

• Silk 1185 in stock, from €7.93/kg

  Satin sheen with highlights. Layers more visible; prints hotter.

• Translucent 461 in stock, from €8.95/kg

  Lets light through. The thinner the wall, the more transparent.

• Glow in the dark 207 in stock, from €10.00/kg

  Glows in the dark after charging with light. Wears brass nozzles.

• Glitter 343 in stock, from €11.95/kg

  Glitter particles in the material. Hides layers; 0.4 mm nozzle or larger.

• Metallic 125 in stock, from €11.09/kg

  Metallic look or real metal powder. Heavy and abrasive if it contains real metal.

• Wood 103 in stock, from €10.30/kg

  With wood fibre. Can be sanded and stained; 0.5 mm nozzle and watch for clogs.

• Marble 94 in stock, from €10.95/kg

  Veining that imitates stone. Hides layers; only changes the look.

• Multicolour 110 in stock, from €14.19/kg

  Changes colour along the strand. Every part comes out different.

• Easy and all-purpose

  PLAPLA+

  Figures, prototypes, decoration and parts that never get hot.

  Heat

  up to 60 °C

  Printer

  Any printer

  The widest range of colours and finishes.

• Parts that get used

  PETGPCTGPETCPE

  Brackets, boxes and spare parts that take knocks or moisture.

  Heat

  up to 80 °C

  Printer

  Heated bed

  Almost as easy as PLA; strings a little more.

• Heat and outdoors

  ABSASAHIPS

  Car parts, outdoor parts or parts near motors.

  Heat

  up to 100 °C

  Printer

  Bed at 100 °CEnclosure

  ASA also does not yellow in the sun.

• Flexible

  TPUTPU-CF

  Cases, gaskets, wheels and dampers.

  Heat

  up to 80 °C

  Printer

  Direct drive extruderPrint slowly

  Shore 95A is the usual hardness; the lower the number, the softer.

• Engineering

  PAPCPPPVB

  Gears, hinges and parts under load or wear.

  Heat

  110-150 °C

  Printer

  EnclosureDry before printing

  Nylon (PA) for wear, polycarbonate (PC) for stiffness and heat, PP for chemicals.

• Fibre reinforced

  PLA-CFPETG-CFPA-CFPA-GFASA-CFABS-CFABS-GFPET-CFPC-CF

  Same as the base material, but stiffer and with a matte finish.

  Heat

  that of the base material

  Printer

  Hardened nozzle

  Glass fibre (GF) takes more heat than carbon fibre (CF).

• High temperature

  PEEKPEKKPEIPPSPPS-CFPPAPPA-CF

  Industrial parts that live above 150 °C.

  Heat

  over 150 °C

  Printer

  Heated chamber

  Price and printer requirements in another league.

• Supports

  PVAHIPSPVB

  Support that dissolves: PVA in water, HIPS in limonene.

  Printer

  Dual extruderDry before printing

  PVA spoils with humidity within days.

1. 1

   Price per kilo, not per spool

   A 750 g spool at €19 costs more per kilo than a 1 kg spool at €22. Everything here is calculated per net kilo of filament.

2. 2

   Where the shop ships from

   Shops in Spain deliver in 1-3 days; those in Germany, Austria or Czechia take longer and require a larger order for free shipping. On small orders compare the total including shipping.

3. 3

   Spool format

   Spool, spool-less refill (for Bambu Lab and similar) or multi-spool pack. Packs lower the price per kilo but tie you to one colour; that is why they are hidden by default.

4. 4

   Finish

   Matte, silk, translucent, glitter, wood or marble change the look and sometimes the price, not the material.

5. 5

   What your printer needs

   1.75 mm diameter almost always (2.85 mm on Ultimaker), hardened nozzle for fibres, direct drive extruder for TPU, enclosure for ABS and ASA.

Delivery time to mainland Spain published by each shop, in business days from dispatch. It is indicative: it does not include handling time or carrier delays. See all shops with their shipping terms.